SureFlow 40 Pump
$8,950.00
This pump is ideal for large-scale construction projects and medium-sized projects in universities and laboratories. It is specifically designed for continuous use with 3D printing architectural objects and housing projects.
This pump can operate continuously on 220V, 15 Amp service. It holds approximately 12.7 gallons of material.
Easy to use, easy to clean, it’s a money-making machine!
Please contact us to purchase this item. We only accept cash, check, or wire transfer for this item. All credit card purchases incur a 3% fee.
The advantage of using just 220 Volts at 15 Amps, single phase, is that it allows the entire printer and pump to run off a small generator or a minimal power supply.
This pump comes with a pressure gauge at the nozzle, which is capable of reading up to 1400 PSI, although the pump is rated at 300 PSI.
15 ft of 1 in hose and a nozzle assembly for Scara printers is included; however, additional custom hose lengths can be ordered.
The control panel has a VFD and RPM readout and variable speed adjustment.
Built with reasonably priced consumables. Rotor stator packages under $350.
Specifications:
- Power: 220 Volt / 15 Amp
- Material Capacity: ~12.7 gallons
- Aggregate Size: Max grain size: 3/32" (2.4mm)
- Max Flow Rate: 8 liter/min (2.11 gal/min)
- Traveling Speed: 50-250 mm/sec in combination with our Mixcell System and Scara Elite Roadrunner
Includes:
- 15 ft of 1 in hose and a nozzle assembly for Scara printers
- Print nozzles: 5/8, 3/4, and 1 inch
- Quick-release hose connectors (1 ¼ inch NPT type D and F)