Uses

The Auger has been developed specifically for use with cementitious materials, allowing you to print small to medium-sized objects with minimal cleanup. The easy cleanup of the Auger makes it perfect for use in indoor labs and material testing. With direct flow controls, you can change print speeds without the need to adjust the extrusion rate, providing greater flexibility. It can be fed by hand or directly by a pump. Although this system will work with a variety of materials, there are some limitations. We recommend aggregate no larger than 2mm, and the material consistency also needs to be adjusted correctly. Avoid excessively thick materials with a high clay content.

Our Auger works especially well with the new 3D Printing products from Sika Corporation. #752

It is possible to print clay, but the consistency needs to be relatively loose. With the clay at this consistency, it's not practical to print unless you plan on injecting some other chemical into the solidified clay after printing.

AugerHP 24 vs 75 Volt

We offer two voltage options for this product: 24 or 75. The 24 is for use with the 3D PotterBot 10 XL, Scara v4, or a stand-alone driver. The 75 is for use with the Scara Elite, Scara Elite Roadrunner, or a stand-alone driver. These may be interchanged later if needed.

Aluminum vs Stainless Steel

Stainless steel is compatible with with Scara v4 and 3D PotterBot 10XL. This option is only available at 24 volts. Aluminum is compatible with the 3D PotterBot 10XL, Scara v4, and Scara Elite (excluding extended models). This option is available in both 24 and 75 volts.

Compatible Machines and Accessories:

• • 3D PotterBot 10 XL: Our largest tabletop model, capable of holding 18 pounds of clay or the Auger - https://3dpotter.com/product/3d-potterbot-10-xl/
  • 3D PotterBot Scara v4: Our most versatile machine, capable of printing large-scale clay and cementitious objects - https://3dpotter.com/product/3d-potterbot-scara-v4/
  • Scara Elite: Large-scale cement 3D printer - https://3dpotter.com/product/scara-elite-v2/
  • Scara Elite Roadrunner: The ideal 3D printer for building houses - https://3dpotter.com/product/scara-elite-roadrunner/

 

*All pumps and mixers come with a limited 90-day warranty.*

Warranty Policy: https://docs.google.com/document/d/1Z9jx1DyrXjjfqQqdB9YPhhqOt0luRj0OLynrjKcb8s4/edit?usp=sharing