3D PotterBot 9 XXL

XXL 1.jpg
XXL 2.jpg
XXL 3.jpg
Parts Box.jpg
XXL 1.jpg
XXL 2.jpg
XXL 3.jpg
Parts Box.jpg

3D PotterBot 9 XXL


For when you need to print the biggest objects, there is the 9 XXL. With a 4000ml capacity, you can print many objects nearly as high as 3 feet.

Add To Cart

3D Potterbot 9 XXL 

The 9 XXL has the capability of printing vessels up to 29" (74cm) high with 18 pounds of clay being extruded at one time. It is constructed with extremely durable components. The XXL has the largest extruder out of all of our printers, letting you print the most amount of time with the least amount of tube reloading. With a 4000ml you can print dozens of objects and still have clay left over.

All 3D Potter printers use anodized aluminium rails from IGUS. These rails are robust and have a smooth surface, allowing for easy movement of parts while being able to withstand classroom or industrial environments.

All of our printers use direct extrusion. This is a unique feature to our printers over our competitors. Other printers use a compressed air system using slip (watered down clay). With 3D potters direct extrusion system, you can extrude full body clay, as well as other paste like materials. All materials used to build our printers are food grade safe, so you can get creative and use other materials of similar viscosity with our printers.

3D Potter is currently in its 9th generation of printer design. The 9th generation brings a new wireless design with a full web interface controlled over WiFi. You can now control and upload files to the printer from multiple devices simultaneously. The interface allows you full control over every setting on the machine. Interface preview.

The 9th gen has a new uniform nozzle design for improved performance, across all of our printers. This allows you to interchange nozzles between all of our printers, from the Micro to the Scara V3.

What's included:

1. 3D PotterBot 9 XXL

2. Closed loop stepper on X, Y, Z, extruder

3. 4000ml extruder, 2 tubes

4. 4 nozzles (standard sizes: 3, 4, 5, and 6mm)

5. Parts Box: Alan key set, grease, Acme driver tool, tie wraps, extra screws

6. Power Supply, USB cable


Printing Envelope:
X-20" (500 mm)
Y-19" (480 mm)
Z-29" (740 mm)

Printer size:
W-33” L-37” H-46”
Maximum operation space needed: W-53” L-41” H-85”
Bat diameter (printer bed): 15” (381mm)
Height to the top of the extruder fully extended is 85” (2159mm)
Weight with extruder: 44 lbs.

Average speed: 2.2’’ to 5.1’’/s (55 to 130 mm/s)
Power Supply: Output - 24V 5-6 amps, Input - 110-220V, 50-60 Hertz (No 220V power plug supplied for customers outside of USA).
Power consumption: 24V ~3 amps, ~70 Watt
Main controller board running Smoothieware with Arm Processor Cortex M3 100 - 120 Mhz

Full control through web interface, no apps or software installation.